Kategori

produk baru

  • बड़े व्यास ऑप्टिकल फाइबर क्लीवर

    LDC-100 बड़े व्यास ऑप्टिकल फाइबर क्लीवर * क्लैडिंग व्यास 80μm ~ 600μm फाइबर के लिए लागू *वैक्यूम पंप वी-नाली फाइबर डालने के लिए सुविधाजनक है *डी टिकाऊ ब्लेड, जीवनकाल 20000 से अधिक बार *डेटा भंडारण 4000 समूह * उपयोगकर्ता के अनुकूल जीयूआई मेनू, संचालित करने में आसान lebih

  • Penyambung Fiber Fusion Multi-Core

    S-22 Multi-Core Fiber Fusion Splicer Splicer F fusi Serat M ulti - inti Otomatis Sepenuhnya Pertama di Cina _ lebih

  • PM serat fusion splicer

    Polarisasi Mempertahankan (PM) Serat Fusion Splicer S-12 * Inti inti keselarasan, rendah splicing loss * Endview dan Profil observasi dan keselarasan * Busur kalibrasi otomatis dan penyambungan * PM serat 45 dan 90 derajat alignment lebih

  • Penyambung LDF S-37

    S-37 LDF Speialty Fiber Fusion Splicer SHINHO S-37 adalah model terbaru yang kami kembangkan, dapat menyambungkan diameter kelongsong serat dari 125 hingga 400μm dengan kehilangan sambungan yang rendah. Kami melengkapi mesin dengan 3 pemegang serat yang berbeda, dan 2 pasang elektroda cadangan. lebih

  • inti penyelarasan fusion splicer

    inti ke inti penyelarasan serat fusion splicer x900 enam motor fusion splicer, inti nyata ke teknologi penyelarasan inti. Splicing 6s, pemanas 16 detik, mengidentifikasi jenis serat secara otomatis. digunakan untuk proyek telekomunikasi / telekomunikasi. lebih

  • mesin splicing serat optik

    kuat multi fungsi arc fusion splicer s16 desain industri yang kuat, anti guncangan, anti debu dan tahan air. dudukan multi fungsi untuk serat telanjang, kabel patch, kabel drop dll. penyambungan dan pemanasan cepat, kalibrasi busur otomatis. lebih

  • थर्मल स्ट्रिपर

    SHINHO X-18 रिबन फाइबर थर्मल स्ट्रिपर शिन्हो X-18 थर्मल स्ट्रिपर एक नव विकसित हाथ से आयोजित थर्मल स्ट्रिपर है, जिसे विशेष रूप से 12 फाइबर तक रिबन केबल के जैकेट के गैर-विनाशकारी थर्मल स्ट्रिपिंग के लिए डिज़ाइन किया गया है। रिबन फाइबर स्प्लिसिंग कार्य के लिए एक अच्छा और विश्वसनीय उपकरण। lebih

  • Pemotong serat

    Fiber Optic Cleaver X-50D Presisi Tinggi Ukuran kecil & ringan, mudah dioperasikan. Presisi tinggi dan kinerja yang stabil. Lebih dari 48.000 waktu masa pakai blade, panjang serat yang dibelah 5~20mm. Bahan berkualitas tinggi lebih

Why Your Fusion Splicer is Mission Critical in Fiber Laser Repairing Work

  • 2025-06-27

1.What Does This "Fiber Splicer" Actually Fix?

Broken Wires (Fibers): Inside the laser, super-thin glass fibers carry the light. These can snap during handling, get bent too far, or get damaged by heat or dirt. You can't just plug them back together like an extension cord deep inside. The splicer cuts out the bad piece and permanently welds in a new section of matching fiber, making the light path whole again with almost no loss.

 

Replacing Worn-Out Parts: Lasers have special protective tips (like end caps) on their output fibers. If these get damaged or stop working well, the whole laser suffers. The splicer carefully welds the laser's internal fiber onto a brand-new replacement tip, which is a very precise job.

 

Adding New Bits: Sometimes a repair means putting in a new part, like an isolator (which stops harmful light reflections). These parts have their own little fiber tails. The splicer welds these tails directly onto the laser's existing fibers, making a strong, low-loss connection inside the machine.

 

2.Why is Welding Fibers Better Than Other Ways?

Almost No Power Loss: Every bit of light matters in a laser. A good fiber weld loses way less light power than any connector you could screw on.

 

Stops Harmful Reflections: Reflected light bouncing back inside a laser is bad news it can make the laser unstable or even damage it. A clean fiber weld creates much less reflection than connectors.

 

Super Strong & Reliable: Once welded and protected with a sleeve, the joint becomes incredibly strong. It handles vibration and heat changes inside the laser much better than connectors that could come loose or get dirty over time. It's a permanent fix.

 

Fewer Weak Spots: Welding means fewer connection points inside the laser where things could potentially go wrong later.

 

3.The Bottom Line for Fixing Lasers:

If you work on fiber lasers, a good fusion splicer isn't just a nice-to-have tool; it's absolutely necessary. You simply can't do reliable, high-quality repairs on these machines without one.

 

It delivers the strong, low-loss, low-reflection connections that keep the laser running powerfully, efficiently, and reliably after the repair.

 

Investing in a quality fusion splicer and learning how to use it well is fundamental for any team serious about fixing fiber lasers quickly and getting them working like new again. When the laser stops, this "fiber splicer" is your best choice.

© hak cipta: SHINHO OPTICS LIMITED Seluruh hak cipta.

teratas

Obrolan sekarang

Obrolan Langsung

    sekarang produk dan layanan Shinho secara luas diterapkan pada teknik komunikasi, jaringan rumah, produksi perangkat optik, penelitian ilmiah, dll. mereka diekspor ke eropa, amerika utara, afrika, amerika selatan dan negara asia lainnya. pertanyaan, jangan ragu untuk menghubungi kami!