0086-13671585101

sales@xhfiber.com

IndonesiaIndonesia
berita
home berita

Polarization-maintaining Fibers

Kategori

produk baru
  • बड़े व्यास ऑप्टिकल फाइबर क्लीवर

    LDC-100 बड़े व्यास ऑप्टिकल फाइबर क्लीवर * क्लैडिंग व्यास 80μm ~ 600μm फाइबर के लिए लागू *वैक्यूम पंप वी-नाली फाइबर डालने के लिए सुविधाजनक है *डी टिकाऊ ब्लेड, जीवनकाल 20000 से अधिक बार *डेटा भंडारण 4000 समूह * उपयोगकर्ता के अनुकूल जीयूआई मेनू, संचालित करने में आसान lebih

  • Penyambung Fiber Fusion Multi-Core

    S-22 Multi-Core Fiber Fusion Splicer Splicer F fusi Serat M ulti - inti Otomatis Sepenuhnya Pertama di Cina _ lebih

  • PM serat fusion splicer

    Polarisasi Mempertahankan (PM) Serat Fusion Splicer S-12 * Inti inti keselarasan, rendah splicing loss * Endview dan Profil observasi dan keselarasan * Busur kalibrasi otomatis dan penyambungan * PM serat 45 dan 90 derajat alignment lebih

  • Penyambung LDF S-37

    S-37 LDF Speialty Fiber Fusion Splicer SHINHO S-37 adalah model terbaru yang kami kembangkan, dapat menyambungkan diameter kelongsong serat dari 125 hingga 400μm dengan kehilangan sambungan yang rendah. Kami melengkapi mesin dengan 3 pemegang serat yang berbeda, dan 2 pasang elektroda cadangan. lebih

  • inti penyelarasan fusion splicer

    inti ke inti penyelarasan serat fusion splicer x900 enam motor fusion splicer, inti nyata ke teknologi penyelarasan inti. Splicing 6s, pemanas 16 detik, mengidentifikasi jenis serat secara otomatis. digunakan untuk proyek telekomunikasi / telekomunikasi. lebih

  • mesin splicing serat optik

    kuat multi fungsi arc fusion splicer s16 desain industri yang kuat, anti guncangan, anti debu dan tahan air. dudukan multi fungsi untuk serat telanjang, kabel patch, kabel drop dll. penyambungan dan pemanasan cepat, kalibrasi busur otomatis. lebih

  • थर्मल स्ट्रिपर

    SHINHO X-18 रिबन फाइबर थर्मल स्ट्रिपर शिन्हो X-18 थर्मल स्ट्रिपर एक नव विकसित हाथ से आयोजित थर्मल स्ट्रिपर है, जिसे विशेष रूप से 12 फाइबर तक रिबन केबल के जैकेट के गैर-विनाशकारी थर्मल स्ट्रिपिंग के लिए डिज़ाइन किया गया है। रिबन फाइबर स्प्लिसिंग कार्य के लिए एक अच्छा और विश्वसनीय उपकरण। lebih

  • Pemotong serat

    Fiber Optic Cleaver X-50D Presisi Tinggi Ukuran kecil & ringan, mudah dioperasikan. Presisi tinggi dan kinerja yang stabil. Lebih dari 48.000 waktu masa pakai blade, panjang serat yang dibelah 5~20mm. Bahan berkualitas tinggi lebih

Polarization-maintaining Fibers

  • 2025-06-06

Optical fibers always exhibit some degree of birefringence, even if they have a circularly symmetric design because in practice there is always some amount of mechanical stress or other effect which breaks the symmetry. As a consequence, the polarization of light propagating in the fiber gradually changes in an uncontrolled (and wavelength-dependent) way, which also depends on any bending of the fiber and on its temperature. 

Principle of Polarization-maintaining Fibers: 

The mentioned problem can be fixed by using a polarization-maintaining fiber, which is not a fiber without birefringence, but on the contrary a specialty fiber with a strong built-in birefringence (high-birefringence fiber or HIBI fiber, PM fiber). Provided that the polarization of light launched into the fiber is aligned with one of the birefringent axes, this polarization state will be preserved even if the fiber is bent. The physical principle behind this can be understood in terms of coherent mode coupling. The propagation constants of the two polarization modes are significantly different due to the strong birefringence, so that the relative phase of such copropagating modes rapidly drifts away. Therefore, any disturbance along the fiber can effectively couple both modes only if it has a significant spatial Fourier component with a wavenumber which matches the difference of the propagation constants of the two polarization modes. If this difference is large enough, the usual disturbances in the fiber are too slowly varying to do effective mode coupling. In quantitative terms, the polarization beat length should be significantly shorter than the typical length scale on which the parasitic birefringence varies.


Polarization-maintaining fibers are applied in devices where the polarization state cannot be allowed to drift, e.g. as a result of temperature changes. Examples are fiber interferometers, fiber-optic gyroscopes and certain fiber lasers.

Disadvantage of using polarization-maintaining fibers are the following:

  • They are more expensive.
  • Not not all kinds of fibers are available in polarization-preserving form. For example, availability can be limited for certain active fibers, for fibers with unusual values of the effective mode area, and for non-silica fibers.
  • Propagation losses are higher than for standard fiber.
  • Usually, an exact rotational alignment of the fiber with respect to the input polarization direction is required; the same holds for splicing of fibers. That makes the production of devices more cumbersome and expensive.

© hak cipta: SHINHO OPTICS LIMITED Seluruh hak cipta.

teratas

Obrolan sekarang

Obrolan Langsung

    sekarang produk dan layanan Shinho secara luas diterapkan pada teknik komunikasi, jaringan rumah, produksi perangkat optik, penelitian ilmiah, dll. mereka diekspor ke eropa, amerika utara, afrika, amerika selatan dan negara asia lainnya. pertanyaan, jangan ragu untuk menghubungi kami!